Emdebian Grip 2.0

The Grip flavor of Emdebian project allows to create thinner Debian root file systems. I've created one that includes apt, vim-tiny, net-tools, iputils-ping, and isc-dhcp-client. Later I've added grub and Kernel 2.6.32-5-686. The total size of this Emdebian is about 66MB, which is 3.5 times smaller than the usual 230 MB required for regular Debian root file system.

Want to test it? I've created a 128MB bootable image file for x86 architecture. You will need at least 48MB of RAM to this image work. You can download it here. For testing use USB pen drive and a personal computer that allows booting from USB. The procedure:
1 - After downloading, uncompress using gzip:
# gzip -d peters-emdebian.img.gz

2 - Copy the image do destination pen drive using dd. Be careful to use correct destination as dd will overwrite it. Replace "X" with the correct drive letter. All data on destination storage will be lost.
# dd if=peters-emdebian.img of=/dev/sdX bs=8k

3 - Boot! Using the storage you've created. Don't tell anyone but the root password is: 3dp

You can use $ df -h and $ cat /proc/meminfo to check the resource consumption of this Emdebian install.

Generating the Emdebian root filesystem from a Debian Squeeze box is easy. Making a bootable image require a little bit more work but also works fine. To generate the rootfs, download this file and:
# multistrap -d grip-squeeze -f grip-squeeze.conf

The Emdebian root filesystem will be saved at the folder grip-squeeze.

More at Emdebian Grip web site.


Comments

Anonymous said…
Dear Peter,
your post is very interessant.
How do you set the root password?
you have post the multistrap conf file, is it possible to see the script you used?
Thanx
Thu Nov 15, 08:35:00 PM GMT-2
Peter said…
Hi,

For changing the root password, first create the Emdebian root as described on the post:

$ multistrap -d grip-squeeze -f grip-squeeze.conf

Then:

# chroot grip-squeeze
# passwd
# exit

I have not used any script. I have used mustistrap tool, copy Kernel/initrd files and installed Grub. The Kernel and Grub thing was made by hand.

Peter
Fri Nov 16, 10:12:00 AM GMT-2
mickael said…
Hi,

very interesting post.
Can you explain, how to make a bootable image after doing multistrap ?

Thanks
Thu May 02, 09:02:00 AM GMT-3
Peter said…
Hi Mickael,

I do not remember exactly what I did but I think I have added the image as a second disk in a Debian virtual machine and run grub-install/install-grub on the added disk. But I found one reference that may help you: http://superuser.com/questions/130955/how-to-install-grub-into-an-img-file
Mon May 06, 04:57:00 AM GMT-3
Post a Comment

Popular posts from this blog

Toshiba R830 and 16GB of RAM

Image
The datasheet of Toshiba R830-10P mentions that the maximum memory capacity is 8GB. See it  here . But Intel says that the i7-2620M supports up to 16GB of RAM. See it here . I have asked for help on Toshiba Forums. Nothing useful from there. See it here . I was curious as I have a very particular need for 16GB of RAM. Today I decided to give it a try. I bought two Patriot PSD38G13332S (8GB PC3 - 10600 1333MHz CL9 SoDimm) and installed it on the notebook. It just worked. So if you have the need for 16GB of RAM and a similar notebook from Toshiba, you can install 16GB of RAM.
Read more

Five steps to create Fedora chroot jail using yum

Pre-Notes: - This will work only if your Linux Distro is based on RPM and YUM. I have tested it on Fedora but it may also work on RHEL and Centos... It will NOT work on Ubuntu, Debian, Suse... - The operating system and its version will be the same inside and outside the chroot jail. - On the example, the chroot will be placed at: /chroot/devel - To install different version of Fedora or other RPM based distro, it will be necessary to manage yum package repositories outside the jail. The five steps: # 1 - Create the chroot directory $ sudo mkdir -p /chroot/devel/var/lib/rpm # 2 - Initiate rpm db on chroot $ sudo rpm --root /chroot/devel --initdb # 3 - download Fedora Release package. # If you do not want Fedora, download the correct *-release package and use it # on step 4. There are examples on the references. $ yumdownloader --destdir=/tmp fedora-release # 4 - Install downloaded Fedora release inside chroot $ sudo rpm --root /chroot/devel -ivh /tmp/fedora-release*r
Read more

How to recompile software with hardware optimization?

This may be useful for compiling local applications that you want to run faster. Try this on your computer: $ echo "" | gcc -march=native -v -E - 2>&1 | grep cc1 On my computer it has returned:  /usr/libexec/gcc/x86_64-redhat-linux/4.6.1/cc1 -E -quiet -v  - -march=corei7-avx -mcx16 -msahf -mno-movbe -maes -mpclmul -mpopcnt -mno-abm -mno-lwp -mno-fma -mno-fma4 -mno-xop -mno-bmi -mno-tbm -mavx -msse4.2 -msse4.1 --param l1-cache-size=32 --param l1-cache-line-size=64 --param l2-cache-size=4096 -mtune=corei7-avx This command probes the local computer for optimization flags. To use it: $ CFLAGS=" [blue string from above] " ./configure You may consider adding the "-O3" flag. The -O3 flag enables levels 1, 2 and 3 of compile time optimization. There are more information about -O3 on gcc man page. For doing it, instead of previous line, use: $ CFLAGS="-O3  [blue string from above] " ./configure From:  http://blog.mybox.ro/2011/11/02
Read more